Switch OLED Disc Drive Repair Repair Guide
Nintendo Switch OLED - Disc Drive Repair
Tools Required
- Tri-wing screwdriver
- Phillips #00 screwdriver
- Plastic spudger
- Tweezers
- Anti-static wrist strap
Materials Required
- Replacement disc drive (if needed)
- Microfiber cloth
- Isopropyl alcohol (90% or higher)
Safety Warnings
- Ensure the device is powered off and unplugged before beginning any repairs.
- Use an anti-static wrist strap to prevent damage to internal components.
- Be cautious of sharp edges inside the console.
- Handle small parts with care to avoid loss or damage.
- Keep liquids away from the console to prevent electrical short-circuiting.
Follow these 7 steps to complete your repair
Prepare Your Workspace
Set up a clean, static-free work environment. Organize your tools and materials for easy access. Attach your anti-static wrist strap to ensure you are grounded and safe from static discharge.
Remove the Back Panel
Using the tri-wing screwdriver, carefully remove the screws securing the back panel of the Nintendo Switch OLED. Gently lift the panel away from the device, taking care not to damage any internal components.
Disconnect the Battery
Locate the battery connector and use a plastic spudger to disconnect it safely. This step is crucial to prevent electrical shock or damage during the repair process.
Access the Disc Drive
With a Phillips #00 screwdriver, remove the screws securing the metal shield that covers the disc drive. Carefully lift the shield and set it aside. Take note of how components are arranged for reassembly.
Inspect the Disc Drive
Visually inspect the disc drive for any obvious signs of damage or obstruction. Use tweezers to gently remove any debris or foreign objects. Clean the drive lens with a microfiber cloth lightly moistened with isopropyl alcohol.
Replace the Disc Drive (if necessary)
If the drive is damaged beyond cleaning or has a mechanical fault, replace it with a new unit. Disconnect the cables and screws holding the drive in place, and carefully install the replacement drive, reconnecting all cables securely.
Reassemble the Console
Reattach the metal shield and secure it with screws. Reconnect the battery, ensuring the connector is firmly in place. Reinstall the back panel and fasten all screws securely with the tri-wing screwdriver.
