Moto E20 Screen Replacement Repair Guide
Motorola Moto E20 - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tool
- Spudger
- Tweezers
- Heat gun or hairdryer
- Suction cup
- SIM card ejector tool
Materials Required
- Replacement screen for Motorola Moto E20
- Double-sided adhesive strips or screen adhesive
Safety Warnings
- Before starting, power off your phone and remove any connected devices.
- Use anti-static precautions to prevent damage to internal components.
- Be cautious with the heat gun to avoid burns or damaging the phone.
- Handle small parts and screws carefully to avoid losing them.
- Ensure you are working on a clean, flat surface to prevent static or accidental damage.
Follow these 9 steps to complete your repair
Power Off the Device and Remove SIM Card
Press and hold the power button to turn off your Moto E20. Use the SIM card ejector tool to remove the SIM card tray from the device.
Remove the Back Cover
Use a plastic opening tool to gently pry open the back cover of the phone. Start from the bottom edge and carefully work your way around until the cover is detached.
Unscrew and Remove the Internal Frame
Using the Phillips #00 screwdriver, remove all screws securing the internal frame. Carefully lift the frame with a spudger and set it aside.
Disconnect the Battery
Using the spudger, gently disconnect the battery connector to ensure no power is flowing through the device during the repair.
Heat and Remove the Front Screen
Use a heat gun or hairdryer to apply heat evenly around the edges of the screen to loosen the adhesive. Once warm, use a suction cup to lift the screen slightly, then insert a plastic opening tool to carefully separate it from the frame.
Disconnect the Display Cable
Locate and gently disconnect the display cable using tweezers. Ensure you do this carefully to avoid damaging the connector.
Install the New Screen
Connect the new screen's display cable. Align the screen with the frame and press it gently into place. Use double-sided adhesive strips or screen adhesive to secure the new screen.
Reassemble the Phone
Reconnect the battery connector. Replace the internal frame and secure it with screws. Snap the back cover onto the device, ensuring all edges are properly aligned.
Test the New Screen
Power on your Moto E20 and test the new screen to ensure it responds to touch and displays correctly.
