Press and hold the power button on your Moto Edge 30 Fusion until the power menu appears. Select 'Power Off' and wait for the device to completely shut down.

Use a SIM eject tool or a paperclip to extract the SIM card tray from the side of the phone. Set the tray aside in a safe place.

Using a heat gun or hairdryer, gently heat the edges of the back cover to soften the adhesive. Keep the heat source moving to avoid overheating any one area.

Carefully insert a plastic opening tool between the back cover and the frame of the phone. Gently pry around the edges until the back cover comes off. Use a suction cup if necessary to assist in lifting the cover.

Locate the battery connector on the motherboard and use a spudger to carefully disconnect it. This step is crucial to prevent any electrical damage during the repair.

Heat the edges of the screen to soften the adhesive. Use a suction cup and a plastic opening tool to gently lift the screen from the frame. Be cautious of the screen's flex cable and disconnect it carefully using tweezers.

Use isopropyl alcohol and a microfiber cloth to clean the frame thoroughly, removing any adhesive residue and debris. Ensure the surface is clean and dry before proceeding.

Align the new screen with the frame and connect the flex cable securely. Carefully press the screen into place, ensuring it is properly seated and aligned.

Apply new adhesive strips around the edges of the back cover. Press the cover firmly onto the frame, ensuring a secure fit. Reheat the edges slightly if necessary to improve adhesion.

Insert the SIM card tray back into its slot. Power on your device by holding the power button and verify that the new screen is functioning properly.