G Stylus 5G Screen Replacement Repair Guide
Motorola G Stylus 5G - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tool
- Nylon spudger
- Tweezers
- Heat gun or hairdryer
- Suction cup
- SIM card eject tool
Materials Required
- Replacement screen for Motorola Moto G Stylus 5G
- Adhesive strips or double-sided tape
- Isopropyl alcohol (90% or higher) and cleaning cloth
Safety Warnings
- Ensure the device is powered off completely before starting any repair.
- Be cautious when using the heat gun or hairdryer to avoid burns or damage to internal components.
- Handle electronic components with care to avoid static damage; use an anti-static wrist strap if available.
- Dispose of the old screen and any damaged components according to local regulations.
Follow these 8 steps to complete your repair
Power Off and Remove SIM Card
Ensure your Motorola Moto G Stylus 5G is completely powered off. Use the SIM card eject tool to remove the SIM card tray and set it aside.
Heat the Edges of the Screen
Use a heat gun or hairdryer to gently heat the edges of the front screen. This will soften the adhesive securing the screen to the frame. Be careful not to overheat the device.
Remove the Front Screen
Place a suction cup near the edge of the screen to lift it slightly. Insert a plastic opening tool into the gap and carefully work your way around the edges to separate the adhesive. Avoid using metal tools to prevent damage.
Disconnect the Screen Cables
Once the screen is loose, carefully lift it to reveal the cables connected to the motherboard. Use tweezers to disconnect the connectors by gently lifting the locking tabs and sliding out the cables.
Clean the Frame
Use isopropyl alcohol and a cleaning cloth to remove any residual adhesive from the frame. Ensure the surface is clean and dry for the new screen installation.
Install the New Screen
Carefully connect the new screen's cables to the motherboard. Ensure the connectors are secure and the locking tabs are closed. Align the screen with the frame.
Secure the Screen
Apply adhesive strips or double-sided tape around the edges of the frame. Gently press the new screen into place, ensuring a secure fit. Apply even pressure around the edges to ensure the adhesive bonds properly.
Reinsert SIM Card and Power On
Reinsert the SIM card tray. Power on the device to test the new screen's functionality. Ensure the touch screen and display work correctly before completing the repair.
