G15 Screen Replacement Repair Guide
Motorola G15 - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tool
- Spudger
- Tweezers
- Heat gun or hair dryer
- Suction cup
Materials Required
- Replacement screen for Motorola Moto G15
- Adhesive strips or double-sided tape
Safety Warnings
- Always power off the device and unplug any external power sources before beginning the repair.
- Handle the internal components with care to avoid damage.
- Use ESD-safe tools or take precautions to prevent static discharge.
- Be cautious when using the heat gun to avoid burns or damage to the device.
- Ensure you are working in a well-lit and clean environment to prevent losing small components.
Follow these 8 steps to complete your repair
Power Down and Remove SIM Card
Start by powering down your Motorola Moto G15 completely. Once the device is off, use the SIM eject tool to remove the SIM card tray from the side of the phone. Set the tray aside safely.
Remove the Back Cover
Use a plastic opening tool to carefully pry off the back cover of the phone. Begin at one corner and work your way around the edges until the cover is completely detached.
Disconnect the Battery
Locate the battery connector inside the phone. Use a spudger to gently disconnect it, ensuring no power is running through the device during the repair.
Detach the Screen Assembly
Apply heat to the edges of the screen using a heat gun or hair dryer to soften the adhesive. Carefully use the suction cup to lift the screen while inserting a plastic opening tool between the screen and the frame. Work around the edges to fully detach the screen assembly.
Remove the Old Screen
Once the screen is detached, carefully disconnect any flex cables attaching the screen to the motherboard. Use tweezers if necessary for precision.
Install the New Screen
Align the new screen with the device and connect the flex cables to the motherboard. Ensure all connections are secure before proceeding.
Reassemble the Device
Reattach the battery connector and carefully place the back cover onto the device. Press firmly around the edges to ensure it snaps into place.
Test the New Screen
Power on the device and test the new screen function. Check for touch responsiveness and display clarity to ensure the repair was successful.
