Moto G Power 5G 2024 Screen Replacement Repair Guide
Motorola Moto G Power 5G 2024 - Screen Replacement
Tools Required
- Plastic opening tool
- Phillips #00 screwdriver
- Tweezers
- Heat gun or hairdryer
- Suction cup
- SIM card eject tool
- Spudger
Materials Required
- Replacement screen for Motorola Moto G Power 5G 2024
- Double-sided adhesive tape
Safety Warnings
- Ensure the device is powered off before starting any repair work.
- Use caution when handling sharp tools to avoid injury.
- Avoid excessive force to prevent damage to internal components.
- Be mindful of static discharge by grounding yourself before handling sensitive components.
- The glass screen may have sharp edges when broken; handle with care.
Follow these 9 steps to complete your repair
Power Off the Device
Hold the power button and select 'Power Off' to completely shut down your Moto G Power 5G 2024. Wait for a few seconds to ensure the device is fully powered down.
Remove the SIM Card Tray
Use the SIM card eject tool to remove the SIM card tray from the side of the phone. Set the tray aside in a safe place.
Heat the Screen Edges
Use a heat gun or hairdryer to gently heat the edges of the screen for about 1-2 minutes. This softens the adhesive holding the screen in place, making it easier to remove.
Remove the Front Screen
Place a suction cup near the bottom edge of the screen. Gently pull up on the suction cup while using a plastic opening tool to carefully separate the screen from the frame. Work your way around the edges, being cautious not to insert the tool too deeply.
Disconnect the Screen
Once the screen is loose, gently lift it from the frame, being mindful of the ribbon cable. Use tweezers to carefully disconnect the cable from the motherboard.
Install the New Screen
Align the ribbon cable of the new screen with the connector on the motherboard and gently press it into place. Ensure a secure connection.
Secure the New Screen
Apply double-sided adhesive tape around the frame. Carefully align and press the new screen into place, ensuring it is flush with the frame.
Reinsert SIM Card Tray
Reinsert the SIM card tray into the phone. Ensure it is seated properly.
Power On the Device
Hold the power button to turn on your Moto G Power 5G 2024. Test the new screen to ensure it is functioning correctly.
