Begin by turning off your Moto G Stylus 4G 2023 completely. Use the SIM eject tool to remove the SIM card tray from the device. This will prevent any damage to the SIM card during the repair process.

Use a heat gun or hair dryer to gently heat the edges of the back cover. This softens the adhesive holding it in place. Use a suction cup to lift the back cover slightly and insert a plastic opening tool to carefully pry it off. Work your way around the edges until the cover is removed. Be gentle to avoid cracking the back cover.

Locate the battery connector and use a spudger to carefully disconnect it from the motherboard. This step is crucial to prevent accidental short-circuiting during the repair.

Unscrew the screws securing the display to the frame using a Phillips #00 screwdriver. Use a spudger to disconnect the display cable from the motherboard. Apply heat around the edges of the display to soften the adhesive. Use a suction cup to lift the display slightly and insert a plastic opening tool to carefully separate it from the frame.

Use adhesive remover and a microfiber cloth to clean any residual adhesive from the frame. Ensure the surface is clean and free of debris to ensure proper adhesion of the new screen.

Align the new screen with the frame and connect the display cable to the motherboard. Use pre-cut adhesive strips or double-sided tape to secure the screen in place. Press firmly around the edges to ensure a good seal.

Reconnect the battery connector to the motherboard. Power on the device to test the new screen for responsiveness and display quality. Ensure everything is functioning correctly before proceeding.

Align the back cover with the phone and press it into place. Ensure it snaps in securely around all edges. If necessary, apply heat to help the adhesive set.

Reinsert the SIM card tray into the device. Ensure it is seated correctly and the phone recognizes the SIM card upon powering on.