Moto G5 Plus Screen Replacement Repair Guide
Motorola Moto G5 Plus - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tool
- Spudger
- Tweezers
- Suction cup
- Heat gun or hairdryer
- SIM card eject tool
Materials Required
- Replacement screen for Motorola Moto G5 Plus
- Adhesive strips for screen replacement
Safety Warnings
- Ensure the device is powered off before beginning any repair.
- Be cautious of sharp edges from cracked glass to avoid injury.
- Use a heat gun or hairdryer with care to avoid overheating the device.
- Handle small components and connectors with care to avoid damage.
- Wear safety glasses to protect your eyes from glass shards.
Follow these 9 steps to complete your repair
Power Off and Remove SIM Card
Turn off your Moto G5 Plus by holding the power button and selecting 'Power Off'. Use the SIM card eject tool to remove the SIM card tray from the side of the device.
Loosen Adhesive and Open the Device
Use a heat gun or hairdryer to gently heat the edges of the screen to soften the adhesive. Use a suction cup to lift the screen slightly and insert a plastic opening tool between the screen and the frame. Carefully work your way around the edges to pry the screen away from the device.
Disconnect the Battery
Once the screen is lifted, use a spudger to disconnect the battery connector to prevent any electrical shorts.
Remove the Old Screen
Carefully disconnect the display cable by using tweezers to lift the connector. Remove the old screen completely from the device.
Prepare the New Screen
Take your replacement screen and ensure the connectors match the original. Remove any protective films from the new screen's adhesive areas.
Attach the New Screen
Connect the display cable of the new screen to the motherboard. Ensure the connector clicks into place securely.
Reassemble the Device
Reconnect the battery connector. Align the new screen with the frame and press gently around the edges to secure the adhesive.
Test the New Screen
Power on the device and test the new screen for touch responsiveness and display quality. Ensure all functions work correctly.
Final Assembly
Reinsert the SIM card tray. Ensure all components are securely in place and there are no gaps around the edges of the screen.
