Moto G6 Play Battery Replacement Repair Guide
Motorola Moto G6 Play - Battery Replacement
Tools Required
- Plastic opening tool
- Phillips #00 screwdriver
- Spudger
- Tweezers
- Heat gun or hairdryer
- Suction cup
Materials Required
- Replacement battery for Motorola Moto G6 Play
- Adhesive strips
Safety Warnings
- Power off the device before beginning any repair.
- If the battery is swollen, proceed with extra caution to avoid punctures or leaks.
- Avoid using metal tools inside the device to prevent short circuits.
- Work in a static-free environment to avoid damaging electronic components.
- Be cautious of sharp edges when opening the phone.
Follow these 8 steps to complete your repair
Prepare Your Workspace
Ensure you have a clean, static-free work surface and all the necessary tools and materials ready. Power off the Motorola Moto G6 Play completely.
Remove the Back Cover
Use a heat gun or hairdryer to gently warm the edges of the back cover for about 1-2 minutes to soften the adhesive. Carefully use a suction cup to create a gap, then insert a plastic opening tool to pry off the back cover. Be patient and work around the edges to avoid damaging the cover.
Detach the Battery Connector
Once the back cover is removed, use the Phillips #00 screwdriver to remove any screws securing the midframe. Use a spudger to gently lift and disconnect the battery connector from the motherboard.
Remove the Old Battery
Carefully use the spudger to lift and remove the old battery. If the battery is held by adhesive, gently pry it free, taking care not to puncture the battery. Use tweezers to remove any remaining adhesive.
Install the New Battery
Place the new battery into the battery compartment. Ensure it is aligned correctly. Use adhesive strips to secure the new battery in place.
Reconnect the Battery Connector
Carefully reconnect the battery connector to the motherboard using the spudger. Ensure it is seated properly to avoid any connectivity issues.
Reassemble the Phone
Reattach the midframe and secure it with the screws using the Phillips #00 screwdriver. Align the back cover and press it firmly in place. If necessary, apply slight heat to soften the adhesive and ensure a secure fit.
Test the New Battery
Power on the Motorola Moto G6 Play and ensure it boots up properly. Check that the new battery is recognized and charging as expected.
