Galaxy Note 10 Plus Screen Replacement Repair Guide
Samsung Galaxy Note 10 Plus - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tool
- Heat gun or hair dryer
- Suction cup
- Spudger
- Tweezers
Materials Required
- Replacement screen for Samsung Galaxy Note 10 Plus
- Adhesive strips or screen adhesive
- Isopropyl alcohol (90% or higher) and lint-free cloth
Safety Warnings
- Ensure the device is powered off before starting the repair.
- Be cautious when using the heat gun to avoid burns or damage to internal components.
- Handle the internal components carefully to avoid static damage.
- Use appropriate protective gear, such as safety glasses and anti-static gloves.
Follow these 9 steps to complete your repair
Power Off the Device
Press and hold the power button on your Galaxy Note 10 Plus until the power menu appears. Select 'Power Off' to completely turn off the device.
Remove the SIM Card Tray
Use the SIM eject tool to remove the SIM card tray from the device. Set the tray aside in a safe place.
Heat the Back Cover
Use a heat gun or hair dryer to gently heat the edges of the back cover to soften the adhesive. Do not overheat to avoid damage. Move the heat source in a circular motion for about 2-3 minutes.
Remove the Back Cover
Place a suction cup near the edge of the back cover and gently lift to create a gap. Insert a plastic opening tool into the gap and carefully slide it around the edges to release the adhesive. Take your time to avoid cracking the back cover.
Disconnect the Battery
Remove the screws securing the midframe using a Phillips #00 screwdriver. Carefully lift the midframe to access the battery connector. Use a spudger to disconnect the battery to ensure no power is flowing through the device.
Remove the Old Screen
Disconnect the display connector using a spudger. Heat the front of the screen with the heat gun to soften the adhesive. Use a suction cup and plastic opening tool to carefully separate the screen from the frame. Be gentle to avoid damaging the frame.
Install the New Screen
Carefully align the new screen with the frame. Connect the display connector to ensure it is secure. Gently press the screen into place, ensuring the adhesive bonds the screen to the frame.
Reassemble the Device
Reconnect the battery connector and reattach the midframe with screws. Carefully place the back cover on the device and press firmly to ensure the adhesive seals. Reinsert the SIM card tray.
Power On and Test
Turn on the device to ensure the new screen is functioning properly. Test the touch functionality and check for any display issues.
