Galaxy S23 Ultra Screen Replacement Repair Guide
Samsung Galaxy S23 Ultra - Screen Replacement
Tools Required
- Phillips #00 screwdriver
- Plastic opening tools
- Suction cup
- Spudger
- Tweezers
- Heat gun or hair dryer
- Adhesive strips or adhesive tape
- Microfiber cloth
Materials Required
- Replacement screen compatible with Samsung Galaxy S23 Ultra
- Isopropyl alcohol (at least 90%)
Safety Warnings
- Power off your device before starting the repair to prevent electrical shock.
- Work on a clean, static-free surface to avoid damage to internal components.
- Be cautious when using a heat gun to avoid burns or damage to the device.
- Handle the delicate components with care to avoid breakage.
- Keep track of all screws and small parts to ensure proper reassembly.
Follow these 7 steps to complete your repair
Power Off and Remove SIM Card
Turn off your Samsung Galaxy S23 Ultra completely. Use the SIM card eject tool to remove the SIM card tray and set it aside. This ensures no active connections and prepares the device for disassembly.
Heat the Back Cover
Use a heat gun or hair dryer to gently heat the edges of the back cover. This softens the adhesive holding the cover in place. Be sure not to overheat to avoid damaging the internal components.
Remove the Back Cover
Carefully insert a plastic opening tool into the seam between the back cover and the device frame. Use a suction cup to gently lift the back cover while sliding the tool around the edges to release the adhesive. Once loose, remove the back cover completely.
Disconnect the Battery
Locate the battery connector on the motherboard. Use a spudger to carefully disconnect the battery cable. This step is crucial to ensure there is no power running through the device during the repair.
Remove the Old Screen
Carefully detach any connectors securing the screen to the motherboard. Use a heat gun to soften the adhesive around the edges of the screen. Insert a plastic opening tool under the screen and gently pry it away from the device frame. Remove the screen completely.
Prepare and Install the New Screen
Clean the frame of any leftover adhesive using isopropyl alcohol and a microfiber cloth. Align the new screen with the device frame and connect it to the motherboard. Secure the screen in place using adhesive strips or tape.
Reconnect the Battery and Reassemble
Reconnect the battery connector to the motherboard. Carefully place and secure the back cover using new adhesive or the original if still sticky. Reinsert the SIM card tray.
